ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series.
- UNC – Unified National Coarse Thread - comparable with the ISO metric thread
- UNF – Unified National Fine Thread
- Female and Male UNC/UNF threads are both parallel
- The UNC/UNF flank angle is 60°
Unified threads comes in three different classes:
- for applications where a liberal tolerance is required to permit easy assembly even with slightly nicked threads
- most commonly used class for general applications
- for applications where closeness of fit and/or accuracy of thread elements are important
UNC - Unified Coarse Threads
UNC threads according ANSI B1.1:
| Major Diameter (in) | Threads per inch (tpi) | Major Diameter | Tap Drill Size (mm) | Pitch (mm) | |
|---|---|---|---|---|---|
| (in) | (mm) | ||||
| #1 - 64 | 64 | 0.073 | 1.854 | 1.50 | 0.397 |
| #2 - 56 | 56 | 0.086 | 2.184 | 1.80 | 0.453 |
| #3 - 48 | 48 | 0.099 | 2.515 | 2.10 | 0.529 |
| #4 - 40 | 40 | 0.112 | 2.845 | 2.35 | 0.635 |
| #5 - 40 | 40 | 0.125 | 3.175 | 2.65 | 0.635 |
| #6 - 32 | 32 | 0.138 | 3.505 | 2.85 | 0.794 |
| #8 - 32 | 32 | 0.164 | 4.166 | 3.50 | 0.794 |
| #10 - 24 | 24 | 0.190 | 4.826 | 4.00 | 1.058 |
| #12 - 24 | 24 | 0.216 | 5.486 | 4.65 | 1.058 |
| 1/4" - 20 | 20 | 0.250 | 6.350 | 5.35 | 1.270 |
| 5/16" - 18 | 18 | 0.313 | 7.938 | 6.80 | 1.411 |
| 3/8" - 16 | 16 | 0.375 | 9.525 | 8.25 | 1.587 |
| 7/16" - 14 | 14 | 0.438 | 11.112 | 9.65 | 1.814 |
| 1/2" - 13 | 13 | 0.500 | 12.700 | 11.15 | 1.954 |
| 9/16" - 12 | 12 | 0.563 | 14.288 | 12.60 | 2.117 |
| 5/8" - 11 | 11 | 0.625 | 15.875 | 14.05 | 2.309 |
| 3/4" - 10 | 10 | 0.750 | 19.050 | 17.00 | 2.540 |
| 7/8" - 9 | 9 | 0.875 | 22.225 | 20.00 | 2.822 |
| 1" - 8 | 8 | 1.000 | 25.400 | 22.85 | 3.175 |
| 1 1/8" - 7 | 7 | 1.125 | 28.575 | 25.65 | 3.628 |
| 1 1/4" - 7 | 7 | 1.250 | 31.750 | 28.85 | 3.628 |
| 1 3/8" - 6 | 6 | 1.375 | 34.925 | 31.55 | 4.233 |
| 1 1/2" - 6 | 6 | 1.500 | 38.100 | 34.70 | 4.233 |
| 1 3/4" - 5 | 5 | 1.750 | 44.450 | 40.40 | 5.080 |
| 2" - 4 1/2 | 4 1/2 | 2.000 | 50.800 | 46.30 | 5.644 |
| 2 1/4" - 4 1/2 | 4 1/2 | 2.250 | 57.150 | 52.65 | 5.644 |
| 2 1/2" - 4 | 4 | 2.500 | 63.500 | 58.50 | 6.350 |
| 2 3/4" - 4 | 4 | 2.750 | 69.850 | 64.75 | 6.350 |
| 3" - 4 | 4 | 3.000 | 76.200 | 71.10 | 6.350 |
| 3 1/4" - 4 | 4 | 3.250 | 82.550 | 77.45 | 6.350 |
| 3 1/2" - 4 | 4 | 3.500 | 88.900 | 83.80 | 6.350 |
| 3 3/4" - 4 | 4 | 3.750 | 95.250 | 90.15 | 6.350 |
| 4" - 4 | 4 | 4.000 | 101.600 | 96.50 | 6.350 |
Pitch is the distance between screw grooves and is commonly used with inch sized products and specified as threads per inch. Lead is the linear travel the nut makes per one screw revolution. The pitch and lead are equal.
See Also
1/4 - 20 UNC : Gewindemaße (Machining Doctor)1/4 - 20 UNC : Thread Dimensions (Machining Doctor)Example - Typical designation of an UNC thread
- 1/4” x 20 UNC
US Bolts - Tightening Torques
UNF - Unified National Fine Threads
UNF threads ANSI B1.1:
| Major Diameter (in) | Threads per inch (tpi) | Major Diameter | Tap Drill Size (mm) | Pitch (mm) | |
|---|---|---|---|---|---|
| (in) | (mm) | ||||
| #0 - 80 | 80 | 0.060 | 1.524 | 1.25 | 0.317 |
| #1 - 72 | 72 | 0.073 | 1.854 | 1.55 | 0.353 |
| #2 - 64 | 64 | 0.086 | 2.184 | 1.90 | 0.397 |
| #3 - 56 | 56 | 0.099 | 2.515 | 2.15 | 0.453 |
| #4 - 48 | 48 | 0.112 | 2.845 | 2.40 | 0.529 |
| #5 - 44 | 44 | 0.125 | 3.175 | 2.70 | 0.577 |
| #6 - 40 | 40 | 0.138 | 3.505 | 2.95 | 0.635 |
| #8 - 36 | 36 | 0.164 | 4.166 | 3.50 | 0.705 |
| #10 - 32 | 32 | 0.190 | 4.826 | 4.10 | 0.794 |
| #12 - 28 | 28 | 0.216 | 5.486 | 4.70 | 0.907 |
| 1/4" - 28 | 28 | 0.250 | 6.350 | 5.50 | 0.907 |
| 5/16" - 24 | 24 | 0.313 | 7.938 | 6.90 | 1.058 |
| 3/8" - 24 | 24 | 0.375 | 9.525 | 8.50 | 1.058 |
| 7/16" - 20 | 20 | 0.438 | 11.112 | 9.90 | 1.270 |
| 1/2" - 20 | 20 | 0.500 | 12.700 | 11.50 | 1.270 |
| 9/16" - 18 | 18 | 0.563 | 14.288 | 12.90 | 1.411 |
| 5/8" - 18 | 18 | 0.625 | 15.875 | 14.50 | 1.411 |
| 3/4" - 16 | 16 | 0.750 | 19.050 | 17.50 | 1.587 |
| 7/8" - 14 | 14 | 0.875 | 22.225 | 20.40 | 1.814 |
| 1" - 12 | 12 | 1.000 | 25.400 | 23.25 | 2.117 |
| 1 1/8" - 12 | 12 | 1.125 | 28.575 | 26.50 | 2.117 |
| 1 1/4" - 12 | 12 | 1.250 | 31.750 | 29.50 | 2.117 |
| 1 3/8" - 12 | 12 | 1.375 | 34.925 | 32.75 | 2.117 |
| 1 1/2" - 12 | 12 | 1.500 | 38.100 | 36.00 | 2.117 |
Example - Typical designation of an UNF thread
- 1/2” x 20 UNF
Related Topics
Fasteners
Bolts, nuts and threaded rods - torque, tension and loads.Mechanics
The relationships between forces, acceleration, displacement, vectors, motion, momentum, energy of objects and more.Threads
Thread data - metric, unified, ACME and others.
Related Documents
ANSI - American National Standards Institute
ANSI provides a forum for development of American national standards.ANSI/ASME B1.5 - ACME Screw Threads
Acme trapezoidal threads.Bolt Stretching and Tensile Stress
Tensile stress and Hooke's Law.BS 21 - Pressure Tight Pipe Thread Joints
BSPT - British Standard Pipe Taper threads & BSP or BSPF - British Standard Pipe Parallel (Straight) threads.Cast Iron Flanges - Stud Reference Chart
The number, diameter and length of studs for cast iron flanges class 125 and 250.EN 10226 - Pipe Threads where pressure tight joints are made on the threads - Dimensions
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads.Flanges - ASME/ANSI B16.5 Flanges and Bolt Dimensions - Class 150 to 2500
Diameters and bolt circles for standard ASME B16.5 flanges - 1/4 to 24 inches - Class 150 to 2500.ISO 2841 - Spark Plugs Metric Threads
Metric threads spark plugs according ISO 28741.ISO 2901 - Metric Trapezoidal Screw Threads
Dimensions of ISO metric trapezoidal screw threads.ISO 7 - Pipe Threads where Pressure-tight Joints are made on the Threads
Pressure-tight joints made on the pipe threads.ISO 724 - Metric Threads
Dimensions of metric threads according ISO 724.Lumber - Surface Finishing
Lumber and surface finishing abbreviations.Metric Bolt Heads and Wrench Sizes
ANSI/SO, DIN and JIS bolts.Metric Steel Bolts - Grades and Property Classes
Metric steel bolts, screws and studs - proof and tensile strength.Reduced Torque with Lubricated Bolts
Lubrication effect on bolt tension and torque.Screws - Metric vs. Inches
Metric versus Imperial equivalent screw dimensions.Steel Bolts - ASTM Grades
ASTM steel bolts - proof and tensile strength.Steel Bolts - SAE Grades
SAE steel bolts - grades ranging grade 1 to 8.2 - proof and tensile strength.Threaded Bolts - Stress Area
Threaded bolts tensile stress area.US Bolts - Head and Wrench Sizes
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt.US Bolts - Tightening Torques
Recommended bolt torques.US Hex Bolts - Inches
ANSI/ASME B18.2.1 Dimensions of Hex Bolts - Imperial units.US Hex Bolts - Metric
ANSI/ASME B18.2.3M Dimensions of Hex Bolts - Metric units.US Machine Screws - Dimensions
Machine screw diameters.US Wood Screws - Nominal Sizes
Wood screws - nominal sizes vs. diameters.Whitworth Pipe Threads
BSPP (G) - British Standard Pipe Parallel and BSPT (R/Rp) – British Standard Tapered Pipe for pipes and tapered threads - G/R/Rp.Wood Screws - Withdrawal Force
Allowable withdrawal load force.Wrench Spanners - Inches vs. mm
Convert between US Inches and metric mm wrench and spanner sizes.
Search
Search is the most efficient way to navigate the Engineering ToolBox.
- Popular internal searches in the Engineering ToolBox
Engineering ToolBox - SketchUp Extension - Online 3D modeling!
Add standard and customized parametric components - like flange beams, lumbers, piping, stairs and more - to your Sketchup model with the Engineering ToolBox - SketchUp Extension - enabled for use with older versions of the amazing SketchUp Make and the newer "up to date" SketchUp Pro. Add the Engineering ToolBox extension to your SketchUp Make/Pro from the Extension Warehouse!
Translate this Page
Translate this page to Your Own Language.
About the Engineering ToolBox!
Privacy Policy
We don't collect information from our users. More about
- the Engineering ToolBox Privacy Policy
We use a third-party to provide monetization technologies for our site. You can review their privacy and cookie policy here.
You can change your privacy settings by clicking the following button: .
Advertise in the ToolBox
If you want to promote your products or services in the Engineering ToolBox - please use Google Adwords. You can target the Engineering ToolBox by using AdWords Managed Placements.
Citation
This page can be cited as
- The Engineering ToolBox (2011). UNC and UNF - Unified Coarce and Unified Fine Inch Threads. [online] Available at: https://www.engineeringtoolbox.com/unified-screw-threads-unc-unf-d_1809.html [Accessed Day Month Year].
Modify the access date according your visit.
